TM 5-3820-276-10-2
0213
TIRE RACK ASSEMBLY REMOVAL FROM WWSV - Continued
4
1
5
2
3
8
7
6
WWDS00342
Figure 1.
Tire Rack Assembly Removal from WWSV.
NOTE
There are four mount pins and safety pins but only one set is shown.
2.
Remove four safety pins (Figure 1, Item 4) from mount pins (Figure 1, Item 5).
3.
Remove four mount pins (Figure 1, Item 5) from tire rack frame (Figure 1, Item 7) and WWSV bracket
(Figure 1, Item 6).
4.
Install nylon web sling (tag line), (Figure 1, Item 8) to tire rack frame (Figure 1, Item 7).
WARNING
Tire rack with four tires weighs approximately 1,136 lb (515 kg). Do not attempt to lift or
move without the aid of an assistant and suitable lifting device. Failure to comply may
result in injury or death to personnel. Seek medical attention in the event of an injury.
5.
Using crane (Volume 1, WP 0034) and with aid of an assistant, remove tire rack frame (Figure 1, Item 7)
from WWSV and place on ground.
