TM 5-3820-276-10-2
0210
ENGINE OIL SERVICING - WELDER/GENERATOR - Continued
2
1
3
5
6
4
WWDS00360
Figure 1.
Engine Oil Fill.
2.
Remove engine oil dipstick (Figure 1, Item 5) from engine block (Figure 1, Item 6).
3.
Wipe engine oil dipstick (Figure 1, Item 5) with cleaning cloth.
4.
Install engine oil dipstick (Figure 1, Item 5) into engine block (Figure 1, Item 6).
5.
Remove engine oil dipstick (Figure 1, Item 5) from engine block (Figure 1, Item 6).
6.
Check engine oil level on engine oil dipstick (Figure 1, Item 5). Oil must be between indicator lines
(Figure 1, Item 4).
7.
Install engine oil dipstick (Figure 1, Item 5) into engine block (Figure 1, Item 6).
8.
Open top access door (Figure 1, Item 2).
9.
Clean area around engine oil fill cap (Figure 1, Item 3) with clean cleaning cloth.
10.
Remove oil fill cap (Figure 1, Item 3).
CAUTION
Do not overfill the engine crankcase lubricating oil system. Failure to comply may result in
damage to equipment.
11.
Add engine oil as required.
12.
Remove engine oil dipstick (Figure 1, Item 5) from engine block (Figure 1, Item 6).
13.
Wipe engine oil dipstick (Figure 1, Item 5) with cleaning cloth.
14.
Install engine oil dipstick (Figure 1, Item 5) into engine block (Figure 1, Item 6).
02/13/2013root(gen.maintwp)wpno(M20002)
