4-22. TANK HOSE MAINTENANCE

TM-10-4930-236-13P Tank and Pump Unit Liquid Dispensing; for Truck Mounting Mil Design Tank and Pump Unit Electric Motor Driven Model (97403) Manual
Page Navigation
85

TM 10-4930-236-13&P 4-22. TANK HOSE MAINTENANCE This task consists of: a. Removal b. Installation INITIAL SETUP Tools Required General Mechanic Tool Kit (Appendix B, Section III, Item 3) Suitable Lifting Device Materials/Parts Required Drip Pans Rags, Wiping (Appendix E, Section ll. Item 13) Hose, Tank to Pump (Appendix F) Equipment Condition Fuel Evacuated from Lines and Manifold Rear Tank Empty Valve Control Cables Disconnected (paragraph 4-17) Personnel Required Two (2) General Safety instructions WARNING Do not smoke within 50 feet (15.34 meters) of the Tank and Pump Unit. Do not drain fuel from the unit on the ground. Use protective equipment to prevent skin and eye contact with fuel. Use a lifting device with a lifting capacity of at least three tons to handle tanks or pump unit. REMOVAL a. Remove tie down straps (1) from both ends of pump unit (2) and rear tank (3). b. Pull out on cam lock handles (4) on manifold couplings (5) and disconnect tank to manifold hoses (6 and 7) c. Move pump unit (2) back to tailgate (8). d. Pull out on cam lock handles (9) and remove rear hose (6). e. Slide the rear tank (3) back to pump unit (2). f. Pull out on cam lock handles (10) and remove front hose (7) from front tank (11). 9. Pull hose (7) out through pump unit (2) frame. 4-50

Privacy Statement
Press Release
Contact