TM 10-4630-207-13&P
0036 00
10. Strip 6-in of outer insulation off of wire (figure 6, item 1).
11. Cut wires to same length as those being replaced (figure 6, item 2).
12. Strip 3/8-in insulation off individual wires (figure 6, item 3).
13. Feed wire through strain relief nut (figure 7, item 1) and grommet (figure 7, item 2).
14. Install and crimp ring terminal to wires (figure 6, item 4).
15. Install ring terminal on connection post (figure 7, item 3).
16. Fasten ring terminals with mounting nuts.
17. Tighten strain relief nut (figure 7, item 1).
18. Install cover (figure 7, item 4) on J-Box (figure 7, item 5).
4
2
1
3
Figure 6. Wire Insulation
0036 00-5
