TM 10-4630-207-13&P
0030 00
2
1
Figure 7. Installing Tapered Shaft Coupler
11. Install flat washer and bolt (figure 8, item 1) into tapered shaft coupler (figure 8, item 2) and tighten.
12. Install flanged pump shaft extension (figure 8, item 3) onto tapered shaft coupler (figure 8, item 2)
and secure with eight 13-millimeter hex bolts, nuts and lock washers (figure 8, item 4).
2
3
2
1
4
Figure 8. Installing Flanged Pump Shaft Extension
13. Place retained or new key (figure 9, item 1) into position on the flanged pump shaft extension (figure
9, item 2).
14. Install pulley adapter (figure 9, item 3) over key on the flanged pump shaft extension (figure 9, item
4). Do not install/tighten set screw (figure 9, item 5) at this time.
0030 00-6
