TM 10-4630-207-13&P
0020 00
2
1
3
4
Figure 1. Safety Relief Valve and Mounting Hardware
4. Remove gasket (figure 2, item 1) and discard in an approved container.
5. Clean mating surfaces of tank flange (figure 2, item 2) and safety relief valve seating surface (figure
3, item 1).
1
2
Figure 2. Gasket and Mating Surface
6. Install new gasket (figure 3, item 2) onto flange (figure 3, item 3).
7. Install new safety relief valve (figure 3, item 4) onto flange (figure 3, item 3)
8. Install and tighten mounting nuts (figure 3, item 5) to flange studs (figure 3, item 6).
0020 00-2
