TM 10-4630-207-13&P
0015 00
1
4
2
3
Figure 1. Hose Couplings
5. Inspect the chopper tube/wand for damage such as dents on the tube (figure 2, item 1), QD
coupling (figure 2, item 2), or the ball valve (figure 2, item 3) handle. Check the handle for free
movement. Check for presence and condition of coupling gasket.
1
2
3
Figure 2. Chopper Tube/Wand
SERVICE
Service the chopper tube/wand and intake and drain hoses as described below.
1. Using long round nose pliers remove any unserviceable gaskets (figure 3, item 1) from the female
coupling (figure 3, item 2) on the hoses and chopper tube/wand (figure 3, item 3). Install new
gaskets as required.
2
3
1
Figure 3. Gasket Installation
0015 00-2
