2.21.33 Turbocharger Assembly Replacement. Model 609-A. (Continued)
Do not work on equipment that is not securely stabilized to prevent rolling
o r s l i d i n g.
Ensure both wheels of equipment have chocks that are secure.
Failure to obey this warning may result in serious personal injury.
a .
Remove bolt (Figure 2-148,
1) and flat washer (2) that secures heat shield
mounting bracket (3) to flange on turbocharger assembly (4).
b .
Remove three bolts (5), flat washers (6), turbocharger (4), and gasket (7)
from exhaust manifold adapter (8). Discard gasket (7).
c .
Remove four nuts (9), lock washers (10), exhaust manifold adapter (8), and
gasket (11) from exhaust manifold (12).
Discard lock washers (10) and gasket
(11).
2.21.33.2 Repair.
a.
Inspect all components and mounting hardware for damage.
b.
Replace all defective components.
2.21.33.3 Installation.
a.
Install new gasket (11) and exhaust manifold adapter (8) on exhaust manifold
(12) and secure with four new lock washers (10) and nuts (9).
b.
Position new gasket (7) and turbocharger assembly (4) on exhaust manifold
adapter (8) and secure with three flat washers (6) and bolts (5).
c .
Position heat shield mounting bracket (3) on flange of turbocharger assembly
(4) and secure with flat washer (2) and bolt (1).
2-336
TM 10-4320-344-24
