a .
Remove two nuts (Figure 2-109, 1), lock washers (2), screws (3), and double
angle bracket (4). Discard lock washers (2).
b .
Remove two nuts (5), lock washers (6), screws (7), and lower bracket
support (8) from left hand radiator support (9).
c .
Remove nut (10), lock washer (11), screw (12), and left hand radiator
support (9) from rear engine support (13). Discard lock washers (11).
2.20.5.2 Repair.
a .
Inspect all components for damage.
b .
Replace all defective components.
2.20.5.3 Assembly.
a .
Position left hand radiator support (9) on rear engine support (13) and secure
with screw (12), new lock washer (11), and nut (10).
b .
Position lower support bracket (8) on left hand radiator support (9) and
secure with two screws (7), new lock washers (6), and nuts (5).
c .
Position double angle bracket (4) between lower support bracket (8) and left
hand radiator support (9) and secure with two screws (3), new lock washers
(2), and nuts (1).
2-257
TM 10-4320-334-24
