TM 10-4320-344-24
Do not work on equipment that is not securely stabilized to prevent rolling
or sliding. Ensure both wheels of equipment have chocks that are secure.
Allow engine to cool before removing radiator cap to avoid being scalded by
hot cleaning compound. Open radiator cap slowly to release pressure.
Drain cleaning compound and allow radiator to cool.
Hot radiator or
cleaning compound can cause serious burns.
Failure to obey these warnings may result in serious personal injury.
c .
Remove radiator cap (Figure 2-107,1) and drain radiator (3). Properly
dispose of cleaning compound in accordance with local hazardous waste standing
operating procedure.
d.
Add new antifreeze until fluid level is visible in radiator filler neck (2).
Antifreeze level will drop when thermostat opens.
e .
Refer to TM 10-4320-344-10 and start engine. When thermostat opens, add
antifreeze until fluid level is visible in radiator filler neck (2).
2-253
f .
Refer to TM 10-4320-344-10 and stop engine. Install radiator cap (1) on
r a d i a t o r ( 3 ).
NOTE
