TM 10-4320-344-24
Figure 2-61.
0il Pressure Gauge Maintenance, Model US636HCCD-1.
d .
Replace oil pressure gauge
(3) if oil pressure gauge wire is damaged.
e .
Replace damaged mounting hardware.
2.16.10.3 Installation.
a .
Install oil pressure gauge (3) and mounting bracket (9) on control panel (10).
b .
Refer to tags and install three wires
(8) on oil pressure gauge (3). Remove
t a g s.
c .
Install two new lock washers (7) and nuts (6) on oil pressure gauge (3).
Wrap antiseize tape in direction of threads on hose assembly.
d.
Install oil hose assembly (1) on elbow (4) and oil pressure gauge (3) and
secure with two hose clamps (1).
2-163
