2.15.10.2 Installation

Figure 2-49. Start alarm Relay Maintenance, Model 609-A.

2.16 CONTROL PANEL ASSEMBLY MAINTENANCE.

TM-10-4320-344-24 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
147

TM 10-4320-344-24 2.15.10 Start Alarm Relay and Start Pilot Relay Maintenance, Models 609-A and 609-C. (Continued) 2.15.10.2 Installation. a . Position start alarm relay (7) against engine mounting bracket (33) and secure with two bolts (31), flat washers (32), one wire (5), two flat washers (30), new lock washers (29), and nuts (28). b. Install flat washer (27), lock washer (24), and nut Install untagged c . Install flat washer (22), new lock washer (19), and d . Install flat washer (17), new lock washer (14), and e . Install flat washer (12), washer [9), and nut (8). new lock washer (26), nut (25), wires (2 and 3), new (23) . diode terminal disconnected in step c. new lock washer (21), nut (20), diode (6), wire (4), nut (18). new lock washer (16), nut (15), diode (6), wire (5), nut (13). new lock washer (11), nut (10), wire (1), new lock f . Remove tags from wires (1, 2, 3, 4 , and 5) and diode (6) and discard. 2-136

Privacy Statement
Press Release
Contact