TM 10-4320-344-24
2.12.16 Support Frame Assembly Maintenance, Model 609-C.
This task covers:
2 .12.16.1 Removal
2.12.16.4
Assembly
2.12.16.2 Disassembly
2.12.16.5 Installation
2.12.16.3 Repair
INITIAL SETUP
Tools
Equipment Conditions (Continued)
General Mechanic’s Automotive
Left Side Panel Assembly removed, paragraph
Tool Kit, Appendix B, Section
2 .
1
2 .
8.
I I I,
Item 1
Left Rear Quarter Panel Assembly removed,
Equipment Conditions
paragraph 2.12.9.
Pumping station shut down, TM
Cooling Duct Assembly and Outlet Duct Frame
10-4320-344-10.
Assembly removed, paragraph 2.12.14.
Top Panel Assembly removed,
General Safety Instructions
paragraph 2.12.4.
To prevent rolling or sliding, do not work
Right Side Panel Assembly removed,
on equipment that is not securely
paragraph 2.12.6.
s t a b i l i z e d.
Control Panel Housing Assembly
Do not work on equipment without following
removed, paragraph 2.12.7.
standard shop safety precautions.
2.12.16.1 Removal.
a .
Remove four nuts (Figure 2-27, 1) and screws (2).
b.
Remove support frame assembly (3) from trailer (4).
2.12.16.2 Disassembly.
a .
Remove four nuts (5), bolts (6), and frame assembly (7) from horizontal frame
assembly (8) .
b .
Remove four nuts (9), bolts (10), and frame assembly (11) from horizontal
frame assembly (8).
2.12.16.3 Repair.
a.
Replace frame assemblies (7 and 11) and horizontal frame assembly (8) if
corroded or damaged to the extent that they can not be properly mounted or
secured.
2.12.16.4 Assembly.
a.
Position frame assembly (11) on horizontal frame assembly (8) and secure with
four bolts (10) and nuts (9).
b.
Position frame assembly (7) on horizontal frame assembly (8) and secure with
four bolts (6) and nuts (5).
2.12.16.5 Installation.
a.
Position support frame assembly (3) on trailer (4) and secure with four screws
(2) and nuts (1).
2-79
