TM 10-4320-318-14
4-27. MAINTENANCE OF HAND CONTROL LEVER.
This task covers:
a. Disassemble
c. Assemble
b. Repair
INITIAL SETUP
Tools
Equipment Conditions
General Mechanics Tool Kit
Pump unit is shutdown (para.2-8).
(Item 1, Appendix B)
a.
DISASSEMBLE (Figure 4-14).
(1)
(2)
(3)
(4)
(5)
Figure 4-14. Hand Control Lever
Remove nut (1) from angular joint (2) at governor lever (3).
Remove nut (4) from angular joint (5) at lever (6).
Remove linkage (7) with angular joints
Remove nuts (9 and 10) from bolt (11)
lever (14) from console (15).
Remove screws (16), discs (17), fixing
(2 and 5) and nuts (8).
and remove disc (12), spring washer (13), hand lever (14), and
flaps (18), and nuts (19) from console (15).
4-33
