4-20. MAINTENANCE OF ENGINE AND PUMP ASSEMBLY.

MAINTENANCE OF NOISE ENCLOSURE - (Cont) - TM-10-4320-318-14_50

TM-10-4320-318-14 Centrifugal Pump Unit Water 125 (NSN 4320-01-156-3873) Model No. 2x2 SP/52109 EIC: ZHT Manual
Page Navigation
41

TM 10-4320-318-14 4-20. MAINTENANCE OF ENGINE AND PUMP ASSEMBLY. This task covers: a. Remove b. Install INITIAL SETUP Tools General Safety Instructions General Mechanics Tool Kit (Item 1, Appendix B) WARNING Parts/Materials Because of the weight and bulk of the engine and pump assembly, a minimum of two people are Lockwashers (TM 10-4320-318-24P) required to remove/install this equipment. Failure to comply with this warning could result in death or Personnel Required serious injury to personnel and damage to equipment. Two Equipment Conditions Noise enclosure is removed (para. 4-19). a. REMOVE (Figure 4-7). Figure 4-7. Engine and Pump Assembly (1) Remove nuts (1), lockwashers (2), flat washers (3), and bolts (4) from the engine mounting brackets (11), and shock mounts (8). 4-19

Privacy Statement
Press Release
Contact