b. INSTALL - TM-10-4320-318-14

4-17. MAINTENANCE OF SPARK ARRESTING MUFFLER AND FLEX PIPING

TM-10-4320-318-14 Centrifugal Pump Unit Water 125 (NSN 4320-01-156-3873) Model No. 2x2 SP/52109 EIC: ZHT Manual
Page Navigation
31

TM 10-4320-318-14 4-16. MAINTENANCE OF MUFFLER - (Cont) (4) Remove nuts (4), lockwashers (5), flat washers (6), and bolts (7). (5) Loosen muffler (9) from muffler mounts (8). (6) Remove nuts (11), lockwashers (12), flat washers (13), bolts (14) that secure muffler mounts (8) to noise enclosure (15). (7) Unscrew muffler (9) from flex piping elbow (10) and remove. b. INSTALL (1) Secure muffler mounts (8) to noise enclosure (15) with bolts (14), flat washers (13), lockwashers (12), and nuts (11). (2) Put muffler (9) through muffler mounts (8) and install into flex piping elbow (10). (3) Clamp muffler mounts (8) on muffler (9) with bolts (7), flat washers (6), lockwashers (5), and nuts (4). (4) Install pipe nipple (3) into muffler (9). (5) Install rain cap (2) onto pipe nipple (3). (6) Install insulation cover (1) over muffler (9). 4-9

Privacy Statement
Press Release
Contact