TM 10-4320-315-24
2-19. MAINTENANCE OF ENGINE TEMPERATURE, OIL PRESSURE, AND FUEL TANK GAGES - (Cont)
(1)
Open control panel door (1).
(2)
Tag and disconnect wires from gage (6), removing nuts (2) and flat washers (3). See wiring diagram
(Figure 2-1, Sheet 1).
(3)
Remove nuts (4) and bracket (5).
(4)
Remove gage (6) with star washer (7).
b.
REPLACE.
(1)
Position replacement gage (6) with star washers (7) in mounting hole on control panel door (1).
(2)
Secure with bracket (5) and nuts (4).
(3)
Connect wires as tagged. Secure with flat washers (3) and nuts (2).
(4)
Close control panel (1).
2-29
