2-16. MAINTENANCE OF BATTERY ASSEMBLY AND BATTERY BOX

TM-10-4320-315-24 Pumping Assembly Water 600 GPM Trailer Mounted (NSN 4320-01-31448844) Manual
Page Navigation
24

TM 10-4320-315-24 2-16. MAINTENANCE OF BATTERY ASSEMBLY AND BATTERY BOX This task covers: a. Service b. Remove c. Install INITIAL SETUP : Tools General Safety Instructions General Mechanics Tool Kit (Item 1, Appendix B) WARNING Materials/Parts Do not smoke while servicing batteries. Explosive gases are emitted from batteries in operation. Lockwashers (TM 10-4320-315-24P) Ignition of these gases can cause severe personal injury. References Equipment Conditions TM 9-6140-200-14 Pumping assembly is shutdown. (Refer to TM 10- 4320-315-10) a. SERVICE. Refer to TM 9-6140-200-14. b. REMOVE. (Figure 2-3) (1) Remove batteries as follows: (a) Disconnect negative battery cable (1) from battery terminal (2). (b) Disconnect positive battery cable (3) from battery terminal (4). (c) Disconnect battery cable (5) from battery terminals (6 and 7). (d) Remove nuts (8), lockwashers (9), bolts (10), and battery bracket (11). (e) Remove batteries (12 and 13) from battery box (14). (2) Remove capscrews (15), lockwashers (16), and battery box (14). Discard lockwashers. c. INSTALL. (1) Install battery box (14) with lockwashers (16) and capscrews (15). (2) Install batteries as follows: (a) Install batteries (12 and 13) in battery box (14). (b) Install battery bracket (11) with bolts (10), lockwashers (9), and nuts (8). (c) Connect battery cable (5) to battery terminals (6 and 7). 2-22

Privacy Statement
Press Release
Contact