TM 10-4320-315-10
in
inches
kg
kilogram
kPa
kilopascals
kW
kilowatt
I
liters
lb
pounds
m
meters
mm
millimeter
mph
miles per hour
MTOE
Modified Table of Organization and Equipment
N•m
Newton-meters
NSN
National Stock Number
para
paragraph
psi
pounds-per-square-inch
psig
pounds-per-square-inch-gage
spm
stroke-per-minute
TAMMS
The Army Maintenance Management System
TMDE
Test, Measurement, and Diagnostic Equipment
TOE
Table of Organization and Equipment
C
degrees Celsius
F
degrees Fahrenheit
Section II. EQUIPMENT DESCRIPTION
1-7 Equipment Characteristics, Capabilities, and Features.
a.
Characteristics. The pumping assembly consists of a diesel-engine driven, self-priming centrifugal pump, control
panel, and a noise enclosure mounted on a wheel-mounted trailer assembly.
b.
Capabilities and Features. The pumping assembly has an operational output of 600 gpm at 150 psig when
pumping water
(1)
Self-priming pump.
(2)
Air-cooled, diesel engine driven.
(3)
Wheel-mounted trailer unit.
(4)
Highly mobile.
(5)
Sound attenuated to 70db2.
1-8 Location and Description of Major Components (Figure 1-2).
a.
PUMP ASSEMBLY (1). Rated at 600 gpm. Draws water from source or upline boost pump and feeds reservoir or
next downline boost pump. Fitted with suction and discharge elbows suitable for connection to 6 in. grooved pipe
couplings.
b.
NOISE ENCLOSURE (2). Provides for noise reduction.
c.
DIESEL ENGINE (3). Engine is a 4-stroke, 6 cylinder, air-cooled diesel engine that drives pump. Operating mode
of engine is set on control panel. Operated in manual or automatic mode.
d.
CONTROL PANEL (4). Controls system operations.
e.
JACKS (5). Used to support and level pumping assembly.
1-2
