TM 10-4320-310-14CHAPTER 3OPERATOR MAINTENANCE INSTRUCTIONS3-1.GENERALThe objective of this chapter is to accurately present to the operator all those instructions and additional informationneeded by the operator to keep the equipment in good operating condition.Section I. LUBRICATION INSTRUCTIONSNOTEThese lubrication Instructions are mandatory.3-2.CHECKING ENGINE OIL LEVELa.With engine level, check oil level. Remove oildipstick (1) and wipe with a lint free cloth. Insert oildipstick all the way into engine. Withdraw dipstick. Engineoil should coat oil dipstick to top mark (2).CAUTIONDo not overfill. Engine damage may result.If overfilled, notify unit maintenance.b.If oil coating is below top mark (2), remove oilcap (3) and add oil of proper viscosity required by ambienttemperature. See following chart.c.Again check oil level to be sure oil coats dipstick(1) to top mark (2). Check that cap (3) is tightly closed.3-31
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
