TM 10-4320-310-14
Table 2-2. Operator's Preventive Maintenance Checks and Services - Continued
B - Before Operation
A - After Operation
M - Monthly
D - During Operation
W - Weekly
B
D
A
W
M
1
•
Frame Assembly and Warning Plates - Continued
•
Visually inspect all frame welds for cracks. Inspect
only those welds that can be seen without
disassembly.
•
Check that warning plate (2), identification plate (4),
and throttle plate (5) can be read.
•
Check visible areas of mounting brackets(3) for
corrosion damage.
•
Check shock mounts (6) for splitting.
•
Check that cranking handle (7) is securely attached
to the frame. Check cranking handle (7) for corrosion
or damage.
•
Check for indication of corrosion in areas between
all mating parts.
•
Check condition of paint. Paint shall be in good
condition with no bare metal or corrosion.
INTERVAL
ITEM
NO.
ITEM TO BE INSPECTED
PROCEDURE
Equipment is
Not Ready/
Available If:
2-6
