REPLACE/ADJUST INJECTION PUMP (Continued)

REPLACE/ADJUST INJECTION PUMP (Continued) - TM-10-4320-310-14_168

APPENDIX A REFERENCES - TM-10-4320-310-14_170

TM-10-4320-310-14 Pump Unit Flammable Liquid Centrifugal Self-Priming 2-Inch 100 GPM Diesel Engine Driven NSN 4320-01-263-3604 Manual
Page Navigation
162

TM 10-4320-310-14 6-9. REPLACE/ADJUST INJECTION PUMP (Continued) WARNING Before starting the engine and after making repairs or adjustments on the fuel system, a 17 mm wrench must be available to allow rapid removal of the steel fuel line at the injection pump in case of a runaway condition. Failure to heed this warning can result in Injury to personnel and equipment damage. 17 Install fuel filter, fuel hoses, and hose clamps as described in INSTALLATION steps 5,6,7,8, and 9 of paragraph 4- 17. 18 Remove C-clamp from fuel hose. 19 Install engine adapter housing. 6-35/(6-36 blank)

Privacy Statement
Press Release
Contact