5-12. REPLACE FLYWHEEL

Figure 5-39. installing the Connecting Rod End Cap

Figure 5-40. Crankshaft and Flywheel Assembly

TM-10-4320-309-14 Pump Unit Centrifugal Self-Priming 125 GPM Class 3 Diesel-Driven Army (NSN 4320-01-247-7127) Marine Corps (NSN 4320-01-313-9442) Manual
Page Navigation
170

TM 10-4320-309-14 TM 4320-1 4/1 5-12. REPLACE FLYWHEEL This task covers: a) Removal b) Installation INITIAL SETUP Tools Materials/Parts Flywheel Tightening Handle (Item 24, Diesel fuel (Item 4, Appendix E, Appendix B, Section III) Section II) Flywheel Extractor (Item 25, Appendix B, Section III Equipment Condition Tool Kit, General Mechanics (Item 2, Para Appendix B, Section III) 3-16 Inlet air sound enclosure assembly Socket Set, 24 mm (Item 10, Appendix B, removed. Section III) 4-20 Cooling case cover removed. Socket Set, 8 to 19 mm (Item 6, Appendix B, Section III) Shop Equipment Automotive Maintenance and Repair: Field Maintenance, Common No. 2 (Item 4, Appendix B, Section III) REMOVAL: a. Remove starter pulley (1) by removing three bolts (2). b. Install flywheel tightening handle (refer to Figure 5-41) by using starter pulley bolts (2). Use this handle to prevent flywheel (5) from turning while loosening flywheel nut (3). c. Remove flywheel end nut (3) and washer (4) from crankshaft (6). 5-40

Privacy Statement
Press Release
Contact