TM 10-4320-309-14
TM 4320-14/1
4-21. REPLACE/INSPECT/SERVICE LUBE OIL STRAINER
This task covers:
a) Removal
c) Inspection
b) Service
d) Installation
INITIAL SETUP
Tools
Tool Kit, General Mechanics (Item 2,
Appendix B, Section III)
Socket Set, 8 to 19 mm (Item 6,
Appendix B, Section III)
Materials/Parts
Diesel fuel (Item 4, Appendix E,
Section II
Equipment
Condition
Para
3-16
Outlet air sound enclosure assembly
removed.
4-11
Volute removed.
4-12
Impeller, shaft seal, and shaft
adapter removed.
4-13
Wear plate removed.
4-14
Pump casing removed from engine.
Figure 4-20. Replacing Lube Oil Strainer
REMOVAL:
a.
Remove two hex head bolts (5) from crankcase cover.
b.
Remove lube oil strainer cover (2) and gasket (3).
c.
Remove strainer (1) and O-ring (4) from groove in end of strainer.
SERVICE:
a.
Thoroughly dean strainer in fuel.
4-45
