TM 10-4320-309-14
TM 4320-14/1
4-10. REPLACE/INSPECT SOUND ENCLOSURE AIR FLOW BAFFLE
This task covers:
a) Inspection
c) Installation
b) Removal
INITIAL SETUP
Tools
Equipment
Condition
Tool Kit, General Mechanics (Item 2,
Para
Appendix B, Section III)
Socket Set, 8 to 19 mm (Item 6,
3-16
Inlet air sound enclosure assembly
Appendix B, Section III)
removed.
4-19
Recoil starter assembly removed from
Materials/Parts
engine.
None
INSPECTION:
a.
Inspect sound enclosure air flow baffle to make sure four bolts (7) are tightened and in place. If not,
retighten or replace bolts.
b.
Inspect cooling case cover seal (5) for damage. Replace if damaged.
c.
Inspect sound enclosure air flow baffle (2) for damage. Replace if damaged.
REMOVAL:
a.
Remove four bolts (7) attaching cooling case cover (1) to engine.
b.
Remove air inlet hose from air cleaner assembly by removing damp.
c.
Remove sound enclosure air flow baffle (2) and cooling case cover (1).
INSTALLATION:
a.
Place cooling case cover (1) onto engine.
b.
Install hose and clamp to air cleaner assembly.
c.
Place sound enclosure air flow baffle (2) onto engine.
d.
Attach cooling case cover (1) and sound enclosure air flow baffle (2) to engine with four bolts (7).
4-16
