TM 10-4320-309-14
TM 4320-14/1
c.
Let set for 2 to 3 minutes.
d.
Using a putty knife, peel adhesive backing from surface of enclosure. Apply additional Toluol as need-
ed.
INSTALLATION:
a.
b.
c.
d.
e.
f.
NOTE
If all parts have been removed, install according to the following se-
quence. If only certain components have been removed, assemble in se-
quence as applicable after repair. Components are assembled using
blind rivets.
Rivet hinge (3) to door (9) using four blind rivets (7).
Position hinge spacer (4) on enclosure (10). Position hinge (3) and door (9) on hinge spacer (4) and
rivet it to the enclosure with four blind rivets (7). Check that the door operates evenly and easily.
Rivet latch (5) to enclosure (10) using two blind rivets (7).
Close the door. Position strike plate (6) on door (9) and engage the latch. Hold the strike plate in place
while disengaging the latch.
Rivet strike plate (6) to door (9) using rivets (12).
Check the operation of latch (5).
4-10
