TM 10-4320-307-24
2-21
FEEDING SYSTEM REPAIR/REPLACE.
This task covers: a. Removal b. Inspection c. Installation d. Bleeding Fuel System
INITIAL SETUP
Tools
Equipment
Tool kit, general mechanics (Item 1, Appendix B)
Condition
Reference
Condition Description
Materials/Parts
Paragraph
Battery box removed
Suitable container
2-27
Crocus abrasive cloth (Item 1, Appendix C)
General Safety Instructions
Engine cool
Well ventilated area
REMOVAL:
Death or serious injury could occur if diesel fuel is not handled carefully. Use
in a well-ventilated area away from open flame, arcing equipment, ignition
sources, heaters, or excessive heat. Engine must be turned off and cool before
refueling. Use proper refueling procedures and equipment to avoid spillage. Do
not run engine near open fuel containers. Always store fuel in proper, marked
containers.
DO NOT SMOKE.
1.
Loosen cap (1) on fuel tank (2).
2.
Remove drain plug (3).
3.
Drain fuel into a suitable container.
4.
Install drain plug (3).
5.
Tighten cap (1).
2-46
