TM 10-4320-307-24
4-13
FLYWHEEL AND FLYWHEEL HOUSING REPAIR (REAR OIL SEAL) (CONT).
13.
Tighten one of the 7/16-inch oil pan mounting
capscrews on each side of oil pan, halfway be-
tween front and rear of oil pan, to 15 ft-lbs (20
N•m) torque.
14.
Tighten four 5/16-inch capscrews in rear of oil pan
to 20 ft-lbs (25 N•m) torque in sequence shown.
15.
Tighten thirty-two (32) 7/16-inch capscrews to 50
ft-lbs (70 N•m) torque in sequence shown.
16. Install and align flywheel and flywheel housing in
accordance with paragraph 3-37.
4-95
