TM 10-4320-307-24
4-4
PUMP ASSEMBLY MECHANICAL SEAL REPAIR (CONT)
9.
Place shaft sleeve packing (13) in position on shaft sleeve (10).
10. Place seal plate packing (14) in position on seal plate (15).
11. Insert shaft sleeve (10) through the seal plate (15). The end of shaft sleeve protrudes through the atmosphere side
of seal plate (15).
12. Insure setting washer (16) is locked with setscrews (17).
NOTE
Ensure setscrews (18) are backed off and do not protrude into bore.
13. Place shaft collar (19) in position and secure on shaft sleeve (10) with six setscrews (20).
4-8
