TM 10-4320-307-24
3-38
OIL PAN AND OIL GAUGE BRACKET REPAIR/REPLACE .
This task covers: a. Removal
b.
Disassembly
c.
Cleaning/Inspection/Repair
d.
Assembly
e.
Installation
INITIAL SETUP
Tools
Equipment
Tool kit, general mechanic's (Item 1, Appendix B)
Condition
Torque wrench (Item 2, Appendix B)
Reference
Condition
Description
Tap and die set
Paragraph
Engine oil drained
Materials/Parts
2-36
Paragraph
Oil drain assembly
Oil pan gasket
2-55
removed
Oil suction correction gasket
2-55
removed
Oil suction and correction gasket
Paragraph
Oil drain tube (HVT)
Hand hole gasket
3-27
disconnected
O-ring seals
Clean vegetable oil (Item 33, Appendix C)
General Safety Instructions
Manual References
Well ventilated area
TM 750-254
REMOVAL
1.
Remove oil gauge bracket as follows.
a.
Remove oil dipstick (1).
b.
Remove oil gauge tube (2) from hand hole cover (3).
c.
Remove four capscrews (4) and washers (5).
d.
Remove hand hole cover (3) from engine.
e.
Remove and discard hand hole gasket (6).
3-145
