TM 10-4320-307-24
2-48
FAN HUB AND BRACKET REPLACE (CONT) .
5.
Remove two bolts and washers (7) securing guard
(8) to engine and remove guard.
6.
Loosen three capscrews (9).
7.
Shift fan hub bracket (10) toward accessory drive
pulley (11) to relieve tension on fan drive belts
(12).
8.
Remove fan drive belts (12) from accessory drive
pulley (11).
CAUTION
Hold the fan securely, one person at each
side, while removing securing capscrews to
pre- vent fan blades from damaging radiator.
9.
Remove three capscrews (9), lockwashers (13),
and washers (14), being sure that fan (15) is held
securely to prevent falling.
10.
Remove fan (15), fan hub assembly (16), and
fan
drive belts (12).
11.
Remove six capscrews and lockwashers (17).
12.
Remove fan (15), fan pilot spacer (18) and fan
spacer gasket (19) from fan hub pulley (20).
2-200
