TM 10-4320-307-24
2-44
CORROSION RESISTOR ASSEMBLY SERVICE/REPAIR/REPLACE. (CONT).
INSTALLATION:
1.
Install bracket (1) to engine with two capscrew and
captive washer assemblies (2) and washers (3).
2.
Install corrosion resistor head (4) to bracket (1) using
four capscrew and captive washer assemblies (5).
3.
Install hose elbows (6 and 7) to corrosion resistor
head (4).
4.
Install elbow (8).
5.
Install adapter (9) to elbow (8).
6.
Install shutoff valve (10) to adapter (9) and shutoff
valve (11) to elbow (8).
7.
Install hoses (12 and 13) to valves (10 and 11) and
slide two hose clamps (14 and 15) over each hose.
8.
Install hoses (12 and 13) to hose elbows (6 and 7) and
tighten four hose clamps in place.
9.
Apply light film of lubricating oil to coolant filter gasket
(16) sealing surface.
10.
Clean gasket surface on corrosion resistor head (4).
CAUTION
Mechanical overtightening may distort the
threads or damage the filter head.
11.
Install coolant filter (17).
12.
Open two shutoff valves (10 and 11).
13.
Replace coolant which had been drained from engine
through radiator fill connection (18).
14.
Replace coolant system pressure cap (19).
2-180
