TM 10-4320-307-241-9LOCATIONANDDESCRIPTION-OFMAJORCOMPONENTS(CONT).FRONT VIEWREAR VIEWSTORAGE BOX (13). A storage box is mounted to the rear of the skid. Items stored in the box are. technical manuals,cotton duck bag, air cleaner rain cap, auxiliary fuel hoses, flange gaskets, nozzle mounting bolts, shims for engine, alienwrench, ground cables, and enclosure lifting eyes.ENGINE EXHAUST SYSTEM (14). The engine is equipped with a spark arresting exhaust muffler. The muffler Is fittedwith a guard and is installed in the vertical position. The muffler may be easily removed and stored on the front end ofthe skid during transportation of the pumping assembly.SKID ASSEMBLY (15). The skid measures approximately 23 by 61/2 feet. The ends of the skid are beveled upward andforklift pockets are In its base (front and back) to allow four-way entry by forklift. The size of the forklift entry pockets are6 by 20 inches. Side pockets penetrate the width of the skid. End pockets penetrate 75 inches. The skid runners arefurnished with 12 mounting holes for anchoring the assembly to a foundation. The skid has four tiedown devices and fourmultipurpose devices (tiedown and lifting). A grounding system allows all noncurrent metallic parts of the pumpingassembly to be connected to two grounding pads at the opposite corners of the skid. Items stored on the skid duringstorage and transportation are: muffler, muffler guard, grounding rods, air intake duct, lifting ball assembly, nozzleadapters, coupling, and battery electrolyte.1-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
