TM 10-4320-226-14
4.13.1.1 Removal.
To prevent rolling or sliding, do not work on equipment that is not
securely stabilized.
Ensure both wheels are secure.
Disconnect negative cables from batteries.
Failure to obey these warnings may result in serious personal injury.
a.
Tag and disconnect two hoses (figure 4-41, 1).
b.
Tag and disconnect all wires (2) from terminal board (3).
c.
Remove nut (4), lockwasher (5), washer (6) and bolt (7).
d.
Remove two nuts (8) and lockwashers (9).
e.
Remove control panel assembly (10).
f.
Remove four lock nuts (11), spacers (12), screws (13) and control panel
assembly (10) from support bracket (14).
4.13.1.2 Installation.
a.
Install control panel assembly (10) on support bracket (14) using screws (13),
spacers (12), and lock nuts (11).
b.
Set control panel assembly (10) with support bracket (14) on pump housing.
c.
Install two lockwashers (9) and nuts (8).
d.
Install bolt (7), washer (6), lockwasher (5) and nut (4).
e.
Connect all wires (2) to terminal board (3).
Remove tags.
f.
Connect hoses (1) to gauges and remove tags.
4-80
