TM 10-4320-226-14
4.12.2.1 Removal.
To prevent rolling or sliding, do not work on equipment that is not
securely stabilized.
Ensure both wheels are secure.
Do not work on battery with negative terminal connected.
Failure to obey these warnings may result in serious personal injury.
a.
Loosen nuts (figure 4-37, 1 and 2) and remove negative battery
terminals (3 and 4) from posts (5 and 6).
b.
Loosen nuts (7 and 8) and remove positive battery terminals (9 and 10) from
posts (11 and 12).
c.
Remove batteries (13 and 14).
4.12.2.2 Servicing.
Clean terminals (3, 4, 9 and 10) and posts (5, 6, 11, and 12) with standard
battery cable and post cleaning brush.
4.12.2.3 Installation.
a.
Install batteries (13 and 14).
b.
Install positive battery terminals (10 and 9) and tighten nuts (8 and 7).
c.
Install negative battery terminals (4 and 3) and tighten nuts (2 and 1).
d.
Coat battery terminals (10, 9, 4, and 3) with a light coat of grease.
4-70