TM 5-4320-302-14
6-15.
CYLINDER (CONT)
Location/Item
Action
Remarks
CAUTION
Piston and cylinder damage may result if pistons are not returned to their original cylinders. Observe
matchmarks so that mixups do not occur.
8.
Piston and
Insert each piston in its respective cylinder or
cylinder
replacement and measure the piston skirt-to-
clearance
cylinder clearance. If clearance is not within
0.0012 to 0.0224 inch (0.031 to 0.569 mm),
replace piston.
9.
Cylinder
Install cylinder (new or replacement) in proper
within
bore of crankcase and measure cylinder bore
crankcase
and out-of-round with a bore gage at the loca-
measurement
tions described above. Rehone or replace as
needed.
INSTALLATION/REPLACEMENT
10. Shims
Apply MIL-G-10924 grease to shims. Install cylinder base.
11. Piston
Place piston on flat wooden blocks. Apply MIL-L-2104 lubricating oil to inside running
surface of cylinder and to piston.
6-104