TM 5-4320-302-14
6-15.
CYLINDER (CONT)
Location/Item
Action
Remarks
d.
Measure cylinder bore as indicated with bore gage.
e.
Measure cylinder bore at levels 1 to 4 of engine centerline axis A and crossline axis
B. Compare measurements with cylinder bore specification data above. If wear
limits for normal or oversized bore cylinders have been reached or exceeded, re-
place cylinder and/or piston. If measurements on axis A and axis B are different,
cylinder is out-of-round or has high spots. Replace cylinder and/or piston as
necessary.
6-101