TM 5-4320-302-14
Table 4-2. Organizational Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. ENGINE CRANKS BUT FAILS TO START
Step 1. Check that the fault sensitive control has been overridden during
starting.
To prevent starter from overheating, do not
crank engine with starter for more than 10
seconds.
Battery life will be lengthened if 60 seconds
is allowed to elapse between starting attempts.
Under any condition, if engine does not start
on initial attempt, allow engine rotation to
stop completely before again engaging starter.
Depress pushbutton on fault sensitive control during starting.
4-29