TM 5-4320-300-14
Table 3-1. Operator/Crew Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
After engine is warm, check oil pressure and water temperature. Oil pressure should be 18 psi (124 kPa) at 1200
rpm. Water temperature should be between 160° to 185°F (710 to 850C).
c.
If both oil pressure and water temperature are correct after engine warmup, but engine stops running after a few
minutes, notify organizational maintenance.
6. EXCESSIVE LUBRICATING OIL CONSUMPTION
Step 1. Check for leaking oil pan gasket, drain plug, or oil filter gasket.
If filter or drain plug is leaking, try to tighten. If either continues to leak, or if oil pan gasket is leaking, notify
organizational maintenance.
3-17