TM 5-4320-275-13 & P
Section II. SERVICE UPON RECEIPT
4-4. SERVICE UPON RECEIPT OF MATERIEL- PUMP ASSEMBLY
1. Top of engine
Ensure tank is in good condition
and not leaking.
2. Side of engine
Check that fuel filter is present and
in good condition.
3. Side of engine
Check that fuel lines are present, in
good condition, and secure.
4. Top of engine
Check that switch is present and in
Check that pipe plug is present and
6. Bottom of
Check that drain plug is present and
7. Pump area
Operate check valves by hand to be
certain they open and close.
Refer to engine manual.
See TM 5-2805-257-14.
4-5. SERVICING AND ADJUSTMENT OF EQUIPMENT
a. Preliminary. No servicing or adjustment is required for the pump. Refer to TM 5-2805-257-14 for servicing and
adjusting the engine.
b. Lubrication. Refer
to LO 5-4320-275-12 (figure 4-1) for lubrication points, intervals, and detailed instructions.