TM 5-3825-270-23&P
0196
FILL - Continued
2
3, 4
Figure 2. Water Pump Oil Service.
WARNING
Prolonged contact with lubricating oil may cause skin rash. Immediately wash skin and
clothing thoroughly and remove saturated clothing that comes in contact with lubricating oil.
Keep area well-ventilated to keep fumes at a minimum. Failure to comply may result in injury
or death to personnel.
CAUTION
Do not over fill water pump oil. Over-filling can cause the bearings to overheat. Failure to
comply may result in damage to equipment.
2.
Using 2 QT funnel, add approximately 3 oz of lubricating oil through air vent hole (Figure 2, Item 4).
3.
Verify oil level though water pump oil level sight gauge (Figure 3, Item 5) on water pump assembly (Figure 3,
Item 2). Oil level should be level with center of oil level sight gauge.