WWDR/WWSV SLAVE STARTING PROCEDURES - Continued
Ensure disabled vehicle is in Neutral and parking brake is set.
Turn ignition key switch (Figure 6, Item 1) to On position and wait for 20 seconds.
Starting Target Vehicle.
Depress clutch pedal (Figure 6, Item 2).
If engine does not start after seven attempts, notify maintenance.
Turn ignition key switch (Figure 6, Item 1) to engage starter for no more than 30 seconds.
Release ignition key switch (Figure 6, Item 1) to On or Run position immediately after engine starts.
Slowly release clutch pedal (Figure 6, Item 2).
If engine oil pressure gauge does not indicate engine oil pressure within 10 to 15 seconds
after starting engine, immediately shut off engine and notify maintenance. Failure to
comply may result in damage to equipment.
Check engine oil pressure gauge (Figure 7, Item 6). Normal operating range is 40 to 70 psi (2.8 to 4.8 bar)
at 625 to 725 rpm on RPM gauge (Figure 7, Item 7).