OPERATING PROCEDURES - MUD CLEANING SYSTEM (MCS)
Equipment Condition (cont.)
MUD CLEANING SYSTEM OPERATION
Do not operate the desander pump at a hydraulic pressure above 5,000 psi (34,474 kPa).
Keep the hydraulic pressure below 5,000 psi (34,474 kPa). Make sure a pressure relief
valve is installed and is in good working order. Failure to comply may result in injury or
death to personnel. Seek medical attention in the event of an injury.
Turn SYSTEM RUN/ENGINE START lever (Figure 1, Item 2) to SYSTEM RUN position.