ELECTRIC BRAKE CONTROLLER OPERATION
Electric brake controller is adjusted by operator as needed for road conditions and weight
of loaded trailer.
With the trailer connected, press and hold the brake pedal. The display (Figure 11, Item 3) will show the
Figure 11. Electric Brake Controller.
Output setting is shown as 0 through 10 with 0 being the minimum and 10 the maximum.
While holding brake pedal, adjust output setting to 2.0 by turning the output control (Figure 11, Item 2) up or
down as needed.
While still holding the brake pedal move the SYNC control (Figure 11, Item 1) slightly, the display will
change to the sync setting.
The SYNC setting is shown as 1o through 9o with 1o being the least aggressive and 9o
being the most aggressive.
Adjust to 4o by sliding the SYNC control (Figure 11, Item 1) forward or backwards as necessary.