6. Remove 20 screws (Figure 4, Item 1) that secure closure ring (Figure 4, Item 2) leaving one screw in place.
Sometimes the drum body will stick to the closure ring. To avoid
damaging the drum body, use care when removing closure ring.
Do not allow inside plate to drop inside of drum. Damage to the drum
body could occur.
7. Hold the inside plate so that it does not drop inside of drum. Remove remaining screw (Figure 4, Item 1) and gently place
the inside plate in the drum. Carefully remove closure ring (Figure 4, Item 2).
8. Reach inside drum body (Figure 5, Item 1) and disconnect three cable assemblies (Figure 5, Item 2) from closure plate
Use care when removing parts from the drum interior.
Damage to the drum body could occur.
If closure plate is difficult to remove, lubricate plate with
non-toxic detergent to assist in removal