TM 10-4320-307-24
4-6
SPEED INCREASER REPAIR (CONT).
3.
Disassemble gear box assembly as follows:
a.
Support unit with output end up.
b.
Remove hose assembly (41) between pump (42) and sump.
c.
Remove four screws (43) and remove pump (42) and gasket (44).
d.
Remove seven capscrews (45) and use two capscrews as pushers to remove bearing carrier (46) from rear
housing (47).
e.
Remove shims (48). Remove roller bearing race (49) from bearing carrier (46).
f.
Remove four capscrews (50) from seal carrier (51) and shim (52) and remove oil seal (53) and dowel pin (54).
4-22