SPEED INCREASER REPAIR (CONT).
Position the clutch assembly on a bench with the sleeve collar and hose
assembly (5) facing upward.
Remove hydraulic grease fitting (11) from hose fitting (3) and remove hose fitting (3) from hose (5).
Remove hose (5) from fitting (12) and remove fitting (12) from sleeve collar assembly (13).
Straighten and remove four cotter pins (14) from lever pins (15). Remove four lever pins (15) from levers and
floating plate (16). Remove two spring washers (17) at each lever location and remove levers (18), sliding
sleeve (19), and sleeve collar (13) from floating plate (16) and adjusting ring assembly.
Straighten and remove eight cotter pins (20) from lever link pins (21). Remove lever link pins (21), lever links
(22), and lever (18) from sliding sleeve assembly (19).
Remove snap ring (23) and sleeve collar (13).