TM 10-4320-307-24
2-35
RADIATOR ASSEMBLY SERVICE/TEST/REPAIR/REPLACE (CONT).
3.
Replace radiator assembly as follows:
a.
Place tank bottom (32) on a clean flat surface.
b.
Place gasket (33) on tank bottom flange.
c.
Position radiator core (35) on top of gasket (33) and tank bottom flange.
d.
Place header bars (34) in position on radiator core (35) flange. Align holes.
e.
Position two side members (42) on top of header bars (34) and align all holes.
f.
Insert 62 screws (29), lockwashers (30), and nuts (31). Do not tighten at this time. Loosely install only.
g.
Place gasket (40) on upper surface flange of radiator core (35).
h.
Position tank top (39) on top of gasket (40).
i.
Install header bars (41) to underside of core flange. Align all holes.
j.
Insert 62 screws (36), lockwashers (37), and nuts (38).
k.
Tighten all screws and nuts.
2-131
