RADIATOR ASSEMBLY SERVICE/TEST/REPAIR/REPLACE (CONT).
Position two radiator brackets (13) against skid and radiator assembly.
Align holes and insert and tighten two screws (14), two washers (15), and nuts (16) for each radiator bracket.
Install vent hose (12) by connecting fitting (10) and fitting (11).
Install makeup hose (8) and connect fitting (9) and clamp (7).
Install upper supply hose (6) and fasten with two clamps (5).
Install lower return hose (4) and fasten with two clamps (3).
aa. Ensure all draincocks are closed and fill system in accordance with step 4 of Servicing task.
ab. Install engine enclosure in accordance with paragraph 2-23.