TM 10-4320-226-14
5.7 FUEL TANK MAINTENANCE.
This task covers: 5.7.1 Removal
5.7.3 Repair
5.7.2 Inspect
5.7.4 Installation
INITIAL SETUP
Tools
General Mechanics Tool
Section III, Item 1)
Material/Parts
Kit (appendix B,
Lockwashers (TM 10-4320-226-24P)
Gaskets (TM 10-4320-226-24P)
Adhesive (appendix E, Section II, Item 2)
Cleaning solvent (appendix E, Section II,
Item 11)
Tags (appendix
Antiseize tape
Item 13)
References
TM 9-237
E, Section II, Item 12)
(appendix E, Section II,
Equipment Conditions
Equipment shut down, refer to
paragraph 2.5.1.2 or 2.5.2.2.
Fuel lines removed from tank
paragraph 4.10.16.
pump Assembly removed, paragraph 5.6.1.
General Safety Instructions
To prevent rolling or sliding, do not
work on equipment that is not securely
stabilized.
Do not smoke, use open flames, or
excessive heat while working with fuel.
Avoid inhalation of fumes from fuel.
Do not work on equipment without
following standard shop safety
precautions.
Figure 5-16.
Fuel Tank Maintenance.
5-45